Digitizers and Processors

Key Features 2 channels at 10 GSample/s DC to 4 GHz analog bandwidth 12-bit resolution 64 GByte of memory (5.15 seconds) 64 mV to 8 V input (45 calibrated ranges) 8.4 GSa/s streaming to CPU and storage Signal averaging with 99% trigger efficiency Real-Time Digital down converter Dedicated high-precision external trigger

The ADP7104 High-performance Digitizer and DP7000 Digital Processor combine Keysight Technologies 10-bit analog-to-digital converter technology (up to 32 GSa/s and 10 GHz analog bandwidth on two channels) with real-time digital signal processing (DSP) hardware, deep memory and data streaming interfaces

The AXIe-1 ADC6000 Series Digital Acquisition and Processing Modules combine Keysight Technologies 8-bit analog-to-digital converter technology (up to 40 GSa/s and 13 GHz analog bandwidth) with built-in digital signal processing hardware and high-speed data transfer link to a computer

The ATCA Guzik WDM 5000 Waveform Digitizer Series provides high-speed waveform capture and analysis in a display-less rack-mounted format. The 12.5 GHz analog bandwidth combined with 40 GSa/s sampling rate and ultra long waveform capture memory provides the capability to capture the most demanding signals.

The CPCI Guzik Signal Analyzer performs all measurements digitally. The known disadvantage of a digital system, compared to an analog one, is a low processing speed. In order to overcome this problem, the D5000 Signal Analyzer uses a high-speed Digital Data Processor with speeds up to 2.5 GSa/s (for parametric measurements).

DP8000 Fiber Optics to PCIe® bridge / FPGA Accelerator Card, enables evolving markets such as High-speed Data-acquisition, High Performance Computing to take advantage of the latest Optics and DDR4 technology.

DP 7000 Digital Processor with Optics, designed for evolving markets such as Real-Time Stream Processing for High-speed Data-acquisition (DAQ), High Performance Computing (HPC), Data Centre Infrastructure, AI Processing and Network applications. The processor takes advantage of the latest Intel 20 nm FPGA-s. which are 2.5X more powerful than in previous Guzik generation devices, fast Optics and DDR4 memory technology.

Guzik Fiber Optics to PCIe® bridge / FPGA Accelerator Card V2, enables evolving markets such as High-speed Data-acquisition, High Performance Computing and Networking to take advantage of the latest Optics and Hybrid Memory Cube technology.

Guzik general purpose, fiber optics to PCIe® bridge card with built in FPGA processing and on-board memory buffer.

18 GHz Input Frequency Range, 1 – 65536 Programmable Division Ratios. Low Phase Noise, High SFDR. 50% output duty cycle at any division ratio. Division Ratio Control both from Front Panel and by USB. Fan-less conduction cooling.